Bag of Indus Valley Multani Mitti Powder (200 g)

What Is Multani Mitti? Origins in India, the Mineral Behind It, and the Contents and Usage of 12Brand19 Products

This article is published by Indo no Mori's media. It includes promotional content, as it features products our shop sources through personal import services.

Multani mitti is an absorbent clay that has long been called "Multan's earth" in India. As a mineral, it belongs to the fuller's earth family and is mixed with water to make face and hair packs.

Reading the ingredient labels of 19 products available from Japan, only are single-ingredient powder 2products. The others are herb-blended powders, ready-mixed packs, and face washes or soaps, with the clay's position in the ingredient list varying from the top to the middle.

What Kind of Earth Is Multani Mitti?

What We Looked At

  • Scope: Indian 12brand19 products that list Multani Mitti (fuller's earth) in the name or main ingredients
  • Sources: ingredient lists on each company's official site and package labels (order, amounts and manufacturer)
  • Mineral information: Indian Bureau of Mines yearbook, 2022 edition, and a 1961 mineralogy paper
  • Survey date: As of October 14, 2026

The Name Comes from a City Now in Pakistan

In Hindi, "Multan's earth." Multan is an ancient city in today's Punjab province of Pakistan, and its name remains as the place this earth came from.

The English name fuller's earth comes from an occupation. It means earth used by "fullers," the craftsmen who used earth to absorb wool grease and finish cloth.

As a Mineral, a Clay That Does Not Swell in Water

The Indian Bureau of Mines yearbook describes fuller's earth as calcium-type bentonite. Sodium bentonite swells in water, but calcium bentonite does not.

In a 1961 paper that examined earth from the Pakistani side, the main mineral was attapulgite (palygorskite). Because the contents vary by region, the name alone does not determine the mineral composition.

  • Hindi: Multani Mitti
  • English common name: Fuller's Earth
  • Ingredient label name: Solum Fullonum (on Khadi labels: "Solum Fullonum")
  • Shown on products: Calcium Bentonite
Bag of Indus Valley Multani Mitti Powder (200 g)

Indus Valley Multani Mitti Powder. Label reads "Fuller's Earth / Calcium Bentonite."

Where in India Is It Mined, and What Is It Used For?

Over 70% of resources are in Rajasthan

According to the yearbook, India's fuller's earth resources are concentrated in Rajasthan state. Multan, the origin of the name, is across the border, and the sites being mined in India today are elsewhere.

State Share of Resources Notes
Rajasthan About 74% States with recorded proven reserves
Telangana About 10% Highest output in the latest year
Arunachal Pradesh About 8% No production reported
Assam About 7% No production reported

Indian Bureau of Mines, Indian Minerals Yearbook 2022 (Fuller's Earth chapter, published March 2024). Resource figures are estimates as of April 2015.

"Cosmetics" Do Not Appear in Mining Statistics

Uses listed in the same yearbook include decolorizing and filtering edible and mineral oils, carbonless paper, carriers for fertilizers and feed, and oil absorbents in factories. Face packs and soaps do not appear in the uses section.

The amount that goes into cosmetics is tiny compared with industrial use. So it is impossible to trace from regional statistics which state's earth is used for skin care; the only way is to read product labels.

The contents come in 4 types, and only 2 is powder alone.

We sorted the 19products by form and by where the clay appears in the ingredient list. Even with the same name, how it is included differs greatly.

① Powder only (single ingredient)

Powders from Indus Valley and Keya Seth. The ingredient list has only 1 ingredient, Multani Mitti, and Indus Valley states that it is made by a company in Himachal Pradesh.

Product Capacity Ingredients
Indus Valley Powder 200 g / 1 kg Multani Mitti only
Keya Seth Powder Pack 100g Multani Mitti only

② Powder mixed with herbs

Ubtan (Indian powder pack) type. Mixed with bean flour, sandalwood, neem and others, with the clay's ranking in the ingredient list ranging from the top to the latter half.

Product Main Partner Ingredients Clay Ranking
Forest Essentials Ubtan Wild turmeric, neem Top of the main ingredients
Indus Valley Sandalwood Pack Sandalwood bark, calamine No. 2
Tjori Rose Face Pack Bean flour, rose petals 3 of 3 ingredients
Shankara Ubtan Chickpea, barley, many herbs 20 of 29 ingredients

③ Pre-mixed packs

Ready to apply straight from the package. Because water comes first, the clay ranks between 2 and 4. Only Patanjali listed the amounts down to each ingredient.

Product Clay Ranking Notes
Khadi Natural Rose Mask Top Rose, licorice, sandalwood
Khadi Natural Rose / Neem Pack No. 2 Kaolin at the top
Mantra Herbal Cinnamon Mud Pack No. 2 Cinnamon at the top
Himalaya Neem Pack 2 of 3 main ingredients No full ingredient list shown
Patanjali Face Pack Position 2 by amount Bentonite as base
Mantra Herbal Turmeric Pack 4 of 5 ingredients Aloe and licorice first
Biotique Multani Clay Pack Unknown Mud + mineral salt + essential oil

④ Face Wash / Soap

In rinse-off products, the clay is only a small component. Soap base and cleansing ingredients come first, and Multani Mitti is listed between position 3 and the middle.

Product Clay Ranking Ingredients Listed First
Forest Essentials Silk Soap No. 3 Saponified coconut oil / palm oil
Patanjali Body Cleanser Base ingredient 3 Soap base
Ayouthveda Clay Soap 1 of 3 layers The other 1 layer is kaolin
WOW Face Wash 8 of 19 ingredients Water, fatty acids, glycerin
Patanjali Face Scrub Among the base ingredients Soap base, scrub particles

Almost no products list origin or grain fineness.

Of 19 products, none list the state or mine where the clay was sourced. Indus Valley stated its manufacturing place (Shimla) and "triple-sifted fine particles," and was the only company to also state the grain size.

Tube of Patanjali Multani Mitti Face Pack

Patanjali Multani Mitti Face Pack. Ingredient amount per 100g is listed.

How to Use: Guidelines for Mixing from Powder

Liquids: water, rose water, milk, or yogurt

Manufacturers' instructions are mostly the same: mix the powder with liquid into a paste, spread it on the face, and rinse off once it dries.

  • Mixing liquid: water or rose water. Many manufacturers suggest milk or yogurt for skin that dries easily.
  • Leave on: until dry. Labeled time is 10-20 min (varies by manufacturer)
  • Frequency: 1-3 times per week(s). No manufacturer recommended daily use.
  • Amount guide: the Indus Valley kit gives about 20 uses from 120 g. For 200 g of powder, roughly 30 uses.

How to Remove and When to Stop

The Himalaya method is to wipe off with a damp sponge or towel, then rinse with water. Dampening it before it dries out completely makes it easier to remove without scrubbing.

  • For a new product, test on the inside of your arm before using it on your face.
  • Avoid the area around the eyes and lips. Do not inhale the powder.
  • If redness, itching, or stinging occurs, rinse off immediately and stop use.
  • Do not use on cuts or swollen areas.

Quantity Limits for Ordering to Japan

According to the Ministry of Health, Labour and Welfare, the guideline for importing cosmetics for personal use is in standard size, 1 product types, up to 24 units. It is limited to your own use; you may not sell or give them to others.

You May Also Like

This page covers Multani Mitti powders, paste packs, and ubtan.
▶ View Face Packs & Masks

*Ingredient rankings are based on the order listed by each brand, counted as-is (generally from highest to lowest content). Information is as of the survey date and may change without notice.

*This article is a general introduction to cosmetics and does not describe medicinal effects. If the product does not suit your skin, stop using it, and consult a dermatologist if symptoms persist.

Back to blog